Kali Linux

GoodHound : Uses Sharphound, Bloodhound And Neo4j To Produce An Actionable List Of Attack Paths

GoodHound came about because I had a need to perform a repeatable assessment of attack paths using Bloodhound.
I found that when used in a defensive way BloodHound was so good at identifying attack paths in a domain I was faced with several thousand to process with each review, with no way to deduplicate the findings I had already logged in previous reviews.

I wanted a way to programmatically find attack paths, and to display these in a prioritised order, beginning with the amount of users exposed to each path. This meant that I could find the key points in the network that would allow me to advise the remediation teams with actions that would help to mitigate the attack paths that the most users were able to use.

I also wanted to be able to extract some summary management information, in order to be able to log these over time. This could help to demonstrate to management improvements over time using charts.

Finally I wanted a way to plumb the paths found back into Bloodhound to be presented with the familiar and easy to read attack path graph that Bloodhound has always done so well.

This is a working project, and my first ever attempt at a real tool. I’m grateful for any feedback you may have, whether that’s bugs, issues, feature requests or general usage questions. Just log an issue and I’ll do my best to accommodate.

Quick Start

To get up and running quickly with default options:

Pre-requisites

Ensure you already have Bloodhound and neo4j setup – https://bloodhound.readthedocs.io/en/latest/#install
Ensure you have python installed
Upload your SharpHound output into Bloodhound

Install GoodHound

pip install goodhound

Run with basic options

goodhound -p “neo4jpassword”

Installation

Pre-requisites

Python and pip already installed.
- This has been tested with Python version 3.9 and 3.10. Earlier versions may also work. Feel free to try and log an issue letting me know if it worked or not.
Both neo4j and bloodhound will need to be already installed. The docs at https://bloodhound.readthedocs.io/en/latest/#install explain this well.
- If running Bloodhound with Sharphound version 4.1 you will need to add a parameter when running GoodHound to patch a minor bug in Bloodhound 4.1 see bug report.
  The parameter is detailed here.

Using Pipenv (recommended)

If you don’t want to make any changes to your installed python libraries you can use pipenv:

pipenv install goodhound

Then call pipenv run to run GoodHound inside of the virtual environment just created

pipenv run goodhound -h

Using Pip

Use pip to install directly from the PyPi library:

pip install goodhound

This will create a ‘goodhound’ entrypoint that you can call from the CLI:

goodhound -h

Clone from GitHub

To run the raw code from GitHub

git clone https://github.com/idnahacks/GoodHound.git
cd GoodHound
pip install -r requirements.txt
python -m goodhound -h

Bloodhound 4.1

With the latest release of Bloodhound 4.1 there is a minor bug where nodes that do not have the highvalue attribute set to true do not end up with the attribute at all.
This causes an issue with GoodHound as it uses this parameter to ascertain paths from non-highvalue nodes to high value nodes.

The Patch

When running GoodHound on a set of data that has been gathered using SharpHound 4.1 add the parameter –patch41:

goodhound -p “neo4jpassword” –patch41

This goes through the neo4j database and assigned the highvalue attribute to false anywhere that it isn’t already set to true.

Parameters

Below is an explanation of all of the available parameters that can be used with GoodHound.

Database settings

-s can be used to point GoodHound to a server other than the default localhost installation (bolt://localhost:7687)
-u can be used to set the neo4j username
-p can be used to set the neo4j password

Output formats

-o can be used to select from:

stdout -displays the output on screen
csv saves a comma separated values file for use with reporting or MI
md or markdown to display a markdown formatted output

-d an optional filepathdirectory path for the csv output option
By default the output is csv and these are created in the current working directory.

-q supresses all output
-v enables verbose output
–debug enables debug output

Number of results

-r can be used to select the amount of results to show. By default the top 5 busiest paths are displayed.
-sort can be used to sort by:

number of users with the path (descending)
hop count (ascending)
risk score (descending)

Schema

-sch select a file containing cypher queries to set a custom schema to alter the default Bloodhound schema.
This can be useful if you want to set the ‘highvalue’ label on AD objects that are not covered as standard, helping to provide internal context.
For example, you want to add the highvalue label to ‘dbserver01’ because it contains all of your customer records. The schema file to load in could contain the following cypher query:

match (c:Computer {name:’DBSERVER01@YOURDOMAIN.LOCAL’}) set c.highvalue=TRUE

The schema can contain multiple queries, each on a separate line.

SQLite Database

By default GoodHound stores all attack paths in a SQLite database called goodhound.db stored in the current working directory. This gives the opportunity to query attack paths over time.
–db-skip will skip logging anything to a local database
–sql-path can be used to point GoodHound to the location of the database file. If a directory is provided a database named goodhound.db will be created in that directory. If an existing db file is provided this db will be updated with any new findings.

Bloodhound 4.1 Patch

When running GoodHound on a set of data that has been gathered using SharpHound 4.1 add the parameter
–patch41

goodhound -p “neo4jpassword” –patch41

This goes through the neo4j database and assigned the high value attribute to false anywhere that it isn’t already set to true.

Output

Default output is to generate a html report and 3 csv files as follows:

Summary Report

The Summary report contains some high level information regarding the number of paths found, the number of enabled non-admin users that are exposed to an attack path, and the number of paths that have been seen before based on the entries in the GoodHound local database.

The end goal is to reduce the number of exposed users, by taking a two pronged approach.
Busiest paths will highlight attack paths that are exposed to the greatest number of users.
Weakest links will highlight links that might help to close down the number of paths available.

Busiest Paths Report

The output shows a total number of unique users that have a path to a HighValue target.
It then breaks this down to individual paths, ordered by the risk score.
Each path is then displayed showing the starting group, the number of non-admin users within that path, the number of hops, the risk score, a text version of the path and also a Cypher query. This cypher query can be directly copied into the Raw Query bar in Bloodhound for a visual representation of the attack path.

Weakest Links Report

The weakest links report is a way to potentially find links of attack paths that repeatedly show up in the dataset. For each weak link shown the report will also tell you how many of the total attack paths that was seen in.

NOTE: In order to use the Bloodhound query that is created with the weakest link report you will need the APOC library neo4j plugin installed. To do this copy the APOC jar file from the $NEO4J_HOME/labs directory to the $NEO4J_HOME/plugins directory and restart Neo4j.

Risk Score

The Risk Score is a mechanism to help prioritise remediation. It is calculated based on the Exploit Cost and the number of non-admin users exposed to that attack path. The more users that are exposed, and the lower the exploit cost, the higher the risk score.
It is not intended to be a risk assessment in and of itself, and the intention is not to assign severities such as Critical, High, Medium etc to certain scores.

The score is calculated using the following formula:

Risk Score = (MaxExploitCostPossible – ExploitCost) / MaxExploitCostPossible * %ofEnabledNon-AdminUserswiththepath

Max Exploit Cost Possible is 3 * the maximum number of hops seen across all attack paths. 3 is chosen because it is the highest score any single hop in an attack path can have.

Exploit Cost

Exploit Cost is an estimation of how noisy or complex a particular attack path might be. (Kudos to the ACLPWN project for this idea.)
For example, if an attacker has compromised userA and userA is a member of groupB then that step in the attack path doesn’t require any further exploitation or real opsec considerations.
Conversely if an attacker has compromised a user’s workstation which also has an admin user session on it, to exploit this the attacker would (possibly) need to elevate permissions on the workstation and run something like Mimikatz to extract credentials from memory. This would require OPSEC considerations around monitoring of LSASS processes and also potentially require endpoint protectionbypasses. All of which make the exploitation that little bit more difficult.

These scores have been assigned based upon my personal best judgement. They are not set in stone and discussions around the scoring are welcome and will only help to improve this.
The scores assigned to each exploit are:

Relationship	Target Node Type	OPSEC Considerations	Possible Protections to Bypass	Possible Privesc Required	Cost
Memberof	Group	No	No	No	0
HasSession	Any	Yes	Yes	Yes	3
CanRDP	Any	No	No	No	0
Contains	Any	No	No	No	0
GPLink	Any	No	No	No	0
AdminTo	Any	Yes	No	No	1
ForceChangePassword	Any	Yes	No	No	1
AllowedToDelegate	Any	Yes	No	No	1
AllowedToAct	Any	Yes	No	No	1
AddAllowedToAct	Any	Yes	No	No	1
ReadLapsPassword	Any	Yes	No	No	1
ReadGMSAPassword	Any	Yes	No	No	1
HasSidHistory	Any	Yes	No	No	1
CanPSRemote	Any	Yes	No	No	1
ExecuteDcom	Any	Yes	No	No	1
SqlAdmin	Any	Yes	No	No	1
AllExtendedRights	Group/User/Computer	Yes	No	No	1
AddMember	Group	Yes	No	No	1
AddSelf	Group	Yes	No	No	1
GenericAll	Group/User/Computer	Yes	No	No	1
WriteDACL	Group/User/Computer	Yes	No	No	1
WriteOwner	Group/User/Computer	Yes	No	No	1
Owns	Group/User/Computer	Yes	No	No	1
GenericWrite	Group/User/Computer	Yes	No	No	1
AllExtendedRights	Domain	Yes	Yes	No	2
GenericAll	Domain	Yes	Yes	No	2
WriteDACL	Domain	Yes	Yes	No	2
WriteOwner	Domain	Yes	Yes	No	2
Owns	Domain	Yes	Yes	No	2
GenericAll	GPO/OU	Yes	No	No	1
WriteDACL	GPO/OU	Yes	No	No	1
WriteOwner	GPO/OU	Yes	No	No	1
Owns	GPO/OU	Yes	No	No	1
WriteSPN	User	Yes	No	No	1
AddKeyCredentialLink	Any	Yes	Yes	No	2

SQLite Database

By default Goodhound will insert all of attack paths that it finds into a local SQLite database located in a db directory inside the current working directory.
This database can be then queried separately using the SQLite tools and queries.

In order to query the database you’ll need the SQLite binaries available from https://www.sqlite.org/download.html