Scrcpy application provides display and control of Android devices connected via USB or over TCP/IP. It does not require any root access. It works on GNU/Linux, Windows and macOS.
It focuses on:
Its features include:
The Android device requires at least API 21 (Android 5.0).
Make sure you enable adb debugging on your device(s).
On some devices, you also need to enable an additional option to control it using a keyboard and mouse.
apt install scrcpybrew install scrcpyBuild from sources: BUILD (simplified process)
On Debian and Ubuntu:
apt install scrcpy
On Arch Linux:
pacman -S scrcpy
A Snap package is available: scrcpy.
For Fedora, a COPR package is available: scrcpy.
For Gentoo, an Ebuild is available: scrcpy/.
You can also build the app manually (simplified process).
For Windows, a prebuilt archive with all the dependencies (including adb) is available:
scrcpy-win64-v1.24.zip6ccb64cba0a3e75715e85a188daeb4f306a1985f8ce123eba92ba74fc9b27367It is also available in Chocolatey:
choco install scrcpy choco install adb # if you don't have it yet
And in Scoop:
scoop install scrcpy scoop install adb # if you don't have it yet
You can also build the app manually.
The application is available in Homebrew. Just install it:
brew install scrcpy
You need adb, accessible from your PATH. If you don’t have it yet:
brew install android-platform-tools
It’s also available in MacPorts, which sets up adb for you:
sudo port install scrcpy
You can also build the app manually.
Plug an Android device into your computer, and execute:
scrcpy
It accepts command-line arguments, listed by:
scrcpy --help
Sometimes, it is useful to mirror an Android device at a lower resolution to increase performance.
To limit both the width and height to some value (e.g. 1024):
scrcpy --max-size=1024 scrcpy -m 1024 # short version
The other dimension is computed so that the Android device aspect ratio is preserved. That way, a device in 1920×1080 will be mirrored at 1024×576.
The default bit-rate is 8 Mbps. To change the video bitrate (e.g. to 2 Mbps):
scrcpy --bit-rate=2M scrcpy -b 2M # short version
The capture frame rate can be limited:
scrcpy --max-fps=15
This is officially supported since Android 10, but may work on earlier versions.
The actual capture framerate may be printed to the console:
scrcpy --print-fps
It may also be enabled or disabled at any time with MOD+i.
The device screen may be cropped to mirror only part of the screen.
This is useful, for example, to mirror only one eye of the Oculus Go:
scrcpy --crop=1224:1440:0:0 # 1224x1440 at offset (0,0)
If --max-size is also specified, resizing is applied after cropping.
To lock the orientation of the mirroring:
scrcpy --lock-video-orientation # initial (current) orientation scrcpy --lock-video-orientation=0 # natural orientation scrcpy --lock-video-orientation=1 # 90° counterclockwise scrcpy --lock-video-orientation=2 # 180° scrcpy --lock-video-orientation=3 # 90° clockwise
This affects recording orientation.
The window may also be rotated independently.
Some devices have more than one encoder, and some of them may cause issues or crash. It is possible to select a different encoder:
scrcpy --encoder=OMX.qcom.video.encoder.avc
To list the available encoders, you can pass an invalid encoder name; the error will give the available encoders:
scrcpy --encoder=_
It is possible to record the screen while mirroring:
scrcpy --record=file.mp4 scrcpy -r file.mkv
To disable mirroring while recording:
scrcpy --no-display --record=file.mp4 scrcpy -Nr file.mkv # interrupt recording with Ctrl+C
“Skipped frames” are recorded, even if they are not displayed in real time (for performance reasons). Frames are timestamped on the device, so packet delay variation does not impact the recorded file.
On Linux, it is possible to send the video stream to a v4l2 loopback device, so that the Android device can be opened like a webcam by any v4l2-capable tool.
The module v4l2loopback must be installed:
sudo apt install v4l2loopback-dkms
To create a v4l2 device:
sudo modprobe v4l2loopback
This will create a new video device in /dev/videoN, where N is an integer (more options are available to create several devices or devices with specific IDs).
To list the enabled devices:
# requires v4l-utils package v4l2-ctl --list-devices # simple but might be sufficient ls /dev/video*
To start scrcpy using a v4l2 sink:
scrcpy --v4l2-sink=/dev/videoN scrcpy --v4l2-sink=/dev/videoN --no-display # disable mirroring window scrcpy --v4l2-sink=/dev/videoN -N # short version
(replace N with the device ID, check with ls /dev/video*)
Once enabled, you can open your video stream with a v4l2-capable tool:
ffplay -i /dev/videoN vlc v4l2:///dev/videoN # VLC might add some buffering delay
For example, you could capture the video within OBS.
It is possible to add buffering. This increases latency, but reduces jitter (see #2464).
The option is available for display buffering:
scrcpy --display-buffer=50 # add 50 ms buffering for display
and V4L2 sink:
scrcpy --v4l2-buffer=500 # add 500 ms buffering for v4l2 sink
Scrcpy uses adb to communicate with the device, and adb can connect to a device over TCP/IP. The device must be connected on the same network as the computer.
An option --tcpip allows to configure the connection automatically. There are two variants.
If the device (accessible at 192.168.1.1 in this example) already listens on a port (typically 5555) for incoming adb connections, then run:
scrcpy --tcpip=192.168.1.1 # default port is 5555 scrcpy --tcpip=192.168.1.1:5555
If adb TCP/IP mode is disabled on the device (or if you don’t know the IP address), connect the device over USB, then run:
scrcpy --tcpip # without arguments
It will automatically find the device IP address, enable TCP/IP mode, then connect to the device before starting.
Alternatively, it is possible to enable the TCP/IP connection manually using adb:
adb over TCP/IP on your device: adb tcpip 5555.adb connect DEVICE_IP:5555 (replace DEVICE_IP with the device IP address you found).scrcpy as usual.Since Android 11, a Wireless debugging option allows to bypass having to physically connect your device directly to your computer.
If the connection randomly drops, run your scrcpy command to reconnect. If it says there are no devices/emulators found, try running adb connect DEVICE_IP:5555 again, and then scrcpy as usual. If it still says there are none found, try running adb disconnect, and then run those two commands again.
It may be useful to decrease the bit-rate and the resolution:
scrcpy --bit-rate=2M --max-size=800 scrcpy -b2M -m800 # short version
If several devices are listed in adb devices, you can specify the serial:
scrcpy --serial=0123456789abcdef scrcpy -s 0123456789abcdef # short version
The serial may also be provided via the environment variable ANDROID_SERIAL (also used by adb).
If the device is connected over TCP/IP:
scrcpy --serial=192.168.0.1:5555 scrcpy -s 192.168.0.1:5555 # short version
If only one device is connected via either USB or TCP/IP, it is possible to select it automatically:
# Select the only device connected via USB scrcpy -d # like adb -d scrcpy --select-usb # long version # Select the only device connected via TCP/IP scrcpy -e # like adb -e scrcpy --select-tcpip # long version
You can start several instances of scrcpy for several devices.
You could use AutoAdb:
autoadb scrcpy -s '{}' To connect to a remote device, it is possible to connect a local adb client to a remote adb server (provided they use the same version of the adb protocol).
To connect to a remote adb server, make the server listen on all interfaces:
adb kill-server adb -a nodaemon server start # keep this open
Warning: all communications between clients and the adb server are unencrypted.
Suppose that this server is accessible at 192.168.1.2. Then, from another terminal, run scrcpy:
# in bash export ADB_SERVER_SOCKET=tcp:192.168.1.2:5037 scrcpy --tunnel-host=192.168.1.2
:: in cmd set ADB_SERVER_SOCKET=tcp:192.168.1.2:5037 scrcpy --tunnel-host=192.168.1.2
# in PowerShell $env:ADB_SERVER_SOCKET = 'tcp:192.168.1.2:5037' scrcpy --tunnel-host=192.168.1.2
By default, scrcpy uses the local port used for adb forward tunnel establishment (typically 27183, see --port). It is also possible to force a different tunnel port (it may be useful in more complex situations, when more redirections are involved):
scrcpy --tunnel-port=1234
To communicate with a remote adb server securely, it is preferable to use an SSH tunnel.
First, make sure the adb server is running on the remote computer:
adb start-server
Then, establish an SSH tunnel:
# local 5038 --> remote 5037 # local 27183 <-- remote 27183 ssh -CN -L5038:localhost:5037 -R27183:localhost:27183 your_remote_computer # keep this open
From another terminal, run scrcpy:
# in bash export ADB_SERVER_SOCKET=tcp:localhost:5038 scrcpy
:: in cmd set ADB_SERVER_SOCKET=tcp:localhost:5038 scrcpy
# in PowerShell $env:ADB_SERVER_SOCKET = 'tcp:localhost:5038' scrcpy
To avoid enabling remote port forwarding, you could force a forward connection instead (notice the -L instead of -R):
# local 5038 --> remote 5037 # local 27183 --> remote 27183 ssh -CN -L5038:localhost:5037 -L27183:localhost:27183 your_remote_computer # keep this open
From another terminal, run scrcpy:
# in bash export ADB_SERVER_SOCKET=tcp:localhost:5038 scrcpy --force-adb-forward
:: in cmd set ADB_SERVER_SOCKET=tcp:localhost:5038 scrcpy --force-adb-forward
# in PowerShell $env:ADB_SERVER_SOCKET = 'tcp:localhost:5038' scrcpy --force-adb-forward
Like for wireless connections, it may be useful to reduce quality:
scrcpy -b2M -m800 --max-fps=15
By default, the window title is the device model. It can be changed:
scrcpy --window-title='My device'
The initial window position and size may be specified:
scrcpy --window-x=100 --window-y=100 --window-width=800 --window-height=600
To disable window decorations:
scrcpy --window-borderless
To keep the scrcpy window always on top:
scrcpy --always-on-top
The app may be started directly in fullscreen:
scrcpy --fullscreen scrcpy -f # short version
Fullscreen can then be toggled dynamically with MOD+f.
The window may be rotated:
scrcpy --rotation=1
Possible values:
0: no rotation1: 90 degrees counterclockwise2: 180 degrees3: 90 degrees clockwiseThe rotation can also be changed dynamically with MOD+← (left) and MOD+→ (right).
Note that scrcpy manages 3 different rotations:
--lock-video-orientation changes the mirroring orientation (the orientation of the video sent from the device to the computer). This affects the recording.--rotation (or MOD+←/MOD+→) rotates only the window content. This affects only the display, not the recording.To disable controls (everything which can interact with the device: input keys, mouse events, drag&drop files):
scrcpy --no-control scrcpy -n
If several displays are available, it is possible to select the display to mirror:
scrcpy --display=1
The list of display ids can be retrieved by:
adb shell dumpsys display # search "mDisplayId=" in the output
The secondary display may only be controlled if the device runs at least Android 10 (otherwise it is mirrored as read-only).
To prevent the device from sleeping after a delay when the device is plugged in:
scrcpy --stay-awake scrcpy -w
The initial state is restored when scrcpy is closed.
It is possible to turn the device screen off while mirroring on start with a command-line option:
scrcpy --turn-screen-off scrcpy -S
Or by pressing MOD+o at any time.
To turn it back on, press MOD+Shift+o.
On Android, the POWER button always turns the screen on. For convenience, if POWER is sent via scrcpy (via right-click or MOD+p), it will force to turn the screen off after a small delay (on a best effort basis). The physical POWER button will still cause the screen to be turned on.
It can also be useful to prevent the device from sleeping:
scrcpy --turn-screen-off --stay-awake scrcpy -Sw
To turn the device screen off when closing scrcpy:
scrcpy --power-off-on-close
By default, on start, the device is powered on.
To prevent this behavior:
scrcpy --no-power-on
For presentations, it may be useful to show physical touches (on the physical device).
Android provides this feature in Developers options.
Scrcpy provides an option to enable this feature on start and restore the initial value on exit:
scrcpy --show-touches scrcpy -t
Note that it only shows physical touches (by a finger on the device).
By default, scrcpy does not prevent the screensaver from running on the computer.
To disable it:
scrcpy --disable-screensaver
Press MOD+r to switch between portrait and landscape modes.
Note that it rotates only if the application in foreground supports the requested orientation.
Any time the Android clipboard changes, it is automatically synchronized to the computer clipboard.
Any Ctrl shortcut is forwarded to the device. In particular:
This typically works as you expect.
The actual behavior depends on the active application though. For example, Termux sends SIGINT on Ctrl+c instead, and K-9 Mail composes a new message.
To copy, cut and paste in such cases (but only supported on Android >= 7):
COPYCUTPASTE (after computer-to-device clipboard synchronization)In addition, MOD+Shift+v injects the computer clipboard text as a sequence of key events. This is useful when the component does not accept text pasting (for example in Termux), but it can break non-ASCII content.
WARNING: Pasting the computer clipboard to the device (either via Ctrl+v or MOD+v) copies the content into the Android clipboard. As a consequence, any Android application could read its content. You should avoid pasting sensitive content (like passwords) that way.
Some Android devices do not behave as expected when setting the device clipboard programmatically. An option --legacy-paste is provided to change the behavior of Ctrl+v and MOD+v so that they also inject the computer clipboard text as a sequence of key events (the same way as MOD+Shift+v).
To disable automatic clipboard synchronization, use --no-clipboard-autosync.
To simulate “pinch-to-zoom”: Ctrl+click-and-move.
More precisely, hold down Ctrl while pressing the left-click button. Until the left-click button is released, all mouse movements scale and rotate the content (if supported by the app) relative to the center of the screen.
Technically, scrcpy generates additional touch events from a “virtual finger” at a location inverted through the center of the screen.
By default, scrcpy uses Android key or text injection: it works everywhere, but is limited to ASCII.
Alternatively, scrcpy can simulate a physical USB keyboard on Android to provide a better input experience (using USB HID over AOAv2): the virtual keyboard is disabled and it works for all characters and IME.
However, it only works if the device is connected via USB.
Note: On Windows, it may only work in OTG mode, not while mirroring (it is not possible to open a USB device if it is already open by another process like the adb daemon).
To enable this mode:
scrcpy --hid-keyboard scrcpy -K # short version
If it fails for some reason (for example because the device is not connected via USB), it automatically fallbacks to the default mode (with a log in the console). This allows using the same command line options when connected over USB and TCP/IP.
In this mode, raw key events (scancodes) are sent to the device, independently of the host key mapping. Therefore, if your keyboard layout does not match, it must be configured on the Android device, in Settings → System → Languages and input → Physical keyboard.
This settings page can be started directly:
adb shell am start -a android.settings.HARD_KEYBOARD_SETTINGS
However, the option is only available when the HID keyboard is enabled (or when a physical keyboard is connected).
Similarly to the physical keyboard simulation, it is possible to simulate a physical mouse. Likewise, it only works if the device is connected by USB.
By default, scrcpy uses Android mouse events injection with absolute coordinates. By simulating a physical mouse, a mouse pointer appears on the Android device, and relative mouse motion, clicks and scrolls are injected.
To enable this mode:
scrcpy --hid-mouse scrcpy -M # short version
You can also add --forward-all-clicks to forward all mouse buttons.
When this mode is enabled, the computer mouse is “captured” (the mouse pointer disappears from the computer and appears on the Android device instead).
Special capture keys, either Alt or Super, toggle (disable or enable) the mouse capture. Use one of them to give the control of the mouse back to the computer.
It is possible to run scrcpy with only physical keyboard and mouse simulation (HID), as if the computer keyboard and mouse were plugged directly to the device via an OTG cable.
In this mode, adb (USB debugging) is not necessary, and mirroring is disabled.
To enable OTG mode:
scrcpy --otg # Pass the serial if several USB devices are available scrcpy --otg -s 0123456789abcdef
It is possible to enable only HID keyboard or HID mouse:
scrcpy --otg --hid-keyboard # keyboard only scrcpy --otg --hid-mouse # mouse only scrcpy --otg --hid-keyboard --hid-mouse # keyboard and mouse # for convenience, enable both by default scrcpy --otg # keyboard and mouse
Like --hid-keyboard and --hid-mouse, it only works if the device is connected by USB.
Two kinds of events are generated when typing text:
By default, letters are injected using key events, so that the keyboard behaves as expected in games (typically for WASD keys).
But this may cause issues. If you encounter such a problem, you can avoid it by:
scrcpy --prefer-text
(but this will break keyboard behavior in games)
On the contrary, you could force to always inject raw key events:
scrcpy --raw-key-events
These options have no effect on HID keyboard (all key events are sent as scancodes in this mode).
By default, holding a key down generates repeated key events. This can cause performance problems in some games, where these events are useless anyway.
To avoid forwarding repeated key events:
scrcpy --no-key-repeat
This option has no effect on HID keyboard (key repeat is handled by Android directly in this mode).
By default, right-click triggers BACK (or POWER on) and middle-click triggers HOME. To disable these shortcuts and forward the clicks to the device instead:
scrcpy --forward-all-clicks
To install an APK, drag & drop an APK file (ending with .apk) to the scrcpy window.
There is no visual feedback, a log is printed to the console.
To push a file to /sdcard/Download/ on the device, drag & drop a (non-APK) file to the scrcpy window.
There is no visual feedback, a log is printed to the console.
The target directory can be changed on start:
scrcpy --push-target=/sdcard/Movies/
Audio is not forwarded by scrcpy. Use sndcpy.
Also see issue #14.
In the following list, MOD is the shortcut modifier. By default, it’s (left) Alt or (left) Super.
It can be changed using --shortcut-mod. Possible keys are lctrl, rctrl, lalt, ralt, lsuper and rsuper. For example:
# use RCtrl for shortcuts scrcpy --shortcut-mod=rctrl # use either LCtrl+LAlt or LSuper for shortcuts scrcpy --shortcut-mod=lctrl+lalt,lsuper
Super is typically the Windows or Cmd key.
| Action | Shortcut |
|---|---|
| Switch fullscreen mode | MOD+f |
| Rotate display left | MOD+← (left) |
| Rotate display right | MOD+→ (right) |
| Resize window to 1:1 (pixel-perfect) | MOD+g |
| Resize window to remove black borders | MOD+w | Double-left-click¹ |
Click on HOME | MOD+h | Middle-click |
Click on BACK | MOD+b | Right-click² |
Click on APP_SWITCH | MOD+s | 4th-click³ |
Click on MENU (unlock screen)⁴ | MOD+m |
Click on VOLUME_UP | MOD+↑ (up) |
Click on VOLUME_DOWN | MOD+↓ (down) |
Click on POWER | MOD+p |
| Power on | Right-click² |
| Turn device screen off (keep mirroring) | MOD+o |
| Turn device screen on | MOD+Shift+o |
| Rotate device screen | MOD+r |
| Expand notification panel | MOD+n | 5th-click³ |
| Expand settings panel | MOD+n+n | Double-5th-click³ |
| Collapse panels | MOD+Shift+n |
| Copy to clipboard⁵ | MOD+c |
| Cut to clipboard⁵ | MOD+x |
| Synchronize clipboards and paste⁵ | MOD+v |
| Inject computer clipboard text | MOD+Shift+v |
| Enable/disable FPS counter (on stdout) | MOD+i |
| Pinch-to-zoom | Ctrl+click-and-move |
| Drag & drop APK file | Install APK from computer |
| Drag & drop non-APK file | Push file to device |
¹Double-click on black borders to remove them.
²Right-click turns the screen on if it was off, presses BACK otherwise.
³4th and 5th mouse buttons, if your mouse has them.
⁴For react-native apps in development, MENU triggers development menu.
⁵Only on Android >= 7.
Shortcuts with repeated keys are executed by releasing and pressing the key a second time. For example, to execute “Expand settings panel”:
All Ctrl+key shortcuts are forwarded to the device, so they are handled by the active application.
To use a specific adb binary, configure its path in the environment variable ADB:
ADB=/path/to/adb scrcpy
To override the path of the scrcpy-server file, configure its path in SCRCPY_SERVER_PATH.
To override the icon, configure its path in SCRCPY_ICON_PATH.
Kali Linux 2024.4, the final release of 2024, brings a wide range of updates and…
This Go program applies a lifetime patch to PowerShell to disable ETW (Event Tracing for…
GPOHunter is a comprehensive tool designed to analyze and identify security misconfigurations in Active Directory…
Across small-to-medium enterprises (SMEs) and managed service providers (MSPs), the top priority for cybersecurity leaders…
The free and open-source security platform SecHub, provides a central API to test software with…
Don't worry if there are any bugs in the tool, we will try to fix…