Udp2raw Tunnel is a tunnel which turns UDP Traffic into Encrypted FakeTCP/UDP/ICMP Traffic by using Raw Socket, helps you Bypass UDP FireWalls(or Unstable UDP Environment). It can defend Replay-Attack and supports Multiplexing. It also acts as a Connection Stabilizer.
When used alone,udp2raw tunnels only UDP traffic. Nevertheless,if you used udp2raw + any UDP-based VPN together,you can tunnel any traffic(include TCP/UDP/ICMP),currently OpenVPN/L2TP/ShadowVPN and tinyfecVPN are confirmed to be supported.
Also ReadSharpSploit – A .NET Post-Exploitation Library Written in C#
ICMP/FakeTCP headers help you bypass UDP blocking, UDP QOS or improper UDP NAT behavior on some ISPs. In ICMP header mode,udp2raw tunnel works like an ICMP tunnel.
UDP headers are also supported. In UDP header mode, it behaves just like a normal UDP tunnel, and you can just make use of the other features (such as encrytion, anti-replay, or connection stalization).
In FakeTCP header mode,udp2raw tunnel simulates 3-way handshake while establishing a connection,simulates seq and ack_seq while data transferring. It also simulates following TCP options: MSS, sackOk, TS, TS_ack, wscale.Firewalls will regard FakeTCP as a TCP connection, but its essentially UDP: it supports real-time/out-of-order delivery(just as normal UDP does), no congrestion control or re-transmission. So there wont be any TCP over TCP problem when using OpenVPN.
Conection failures are detected by heartbeats. If timed-out, client will automatically change port number and reconnect. If reconnection is successful, the previous connection will be recovered, and all existing UDP conversations will stay vaild.
For example, if you use udp2raw + OpenVPN, OpenVPN won’t lose connection after any reconnect, even if network cable is re-plugged or WiFi access point is changed.
make cross then everything is done.(Note:Pre-compiled binaries for Desktop,RaspberryPi,Android,some Openwrt Routers are already included in Releases)Bypass UDP QoS Bypass UDP Blocking Bypass OpenVPN TCP over TCP problem OpenVPN over ICMP UDP to ICMP tunnel UDP to TCP tunnel UDP over ICMP UDP over TCP
Assume your UDP is blocked or being QOS-ed or just poorly supported. Assume your server ip is 44.55.66.77, you have a service listening on udp port 7777.
# Run at server side:
./udp2raw_amd64 -s -l0.0.0.0:4096 -r 127.0.0.1:7777 -k "passwd" --raw-mode faketcp -a
# Run at client side
./udp2raw_amd64 -c -l0.0.0.0:3333 -r44.55.66.77:4096 -k "passwd" --raw-mode faketcp -a (The above commands need to be run as root. For better security, with some extra steps, you can run udp2raw tunnel as non-root)
Now,an encrypted raw tunnel has been established between client and server through TCP port 4096. Connecting to UDP port 3333 at the client side is equivalent to connecting to port 7777 at the server side. No UDP traffic will be exposed.
udp2raw tunnel
git version:6e1df4b39f build date:Oct 24 2017 09:21:15
repository: https://github.com/wangyu-/udp2raw-tunnel
usage:
run as client : ./this_program -c -l local_listen_ip:local_port -r server_address:server_port [options]
run as server : ./this_program -s -l server_listen_ip:server_port -r remote_address:remote_port [options]
common options,these options must be same on both side:
--raw-mode <string> avaliable values:faketcp(default),udp,icmp
-k,--key <string> password to gen symetric key,default:"secret key"
--cipher-mode <string> avaliable values:aes128cbc(default),xor,none
--auth-mode <string> avaliable values:hmac_sha1,md5(default),crc32,simple,none
-a,--auto-rule auto add (and delete) iptables rule
-g,--gen-rule generate iptables rule then exit,so that you can copy and
add it manually.overrides -a
--disable-anti-replay disable anti-replay,not suggested
client options:
--source-ip <ip> force source-ip for raw socket
--source-port <port> force source-port for raw socket,tcp/udp only
this option disables port changing while re-connecting
other options:
--conf-file <string> read options from a configuration file instead of command line.
check example.conf in repo for format
--fifo <string> use a fifo(named pipe) for sending commands to the running program,
check readme.md in repository for supported commands.
--log-level <number> 0:never 1:fatal 2:error 3:warn
4:info (default) 5:debug 6:trace
--log-position enable file name,function name,line number in log
--disable-color disable log color
--disable-bpf disable the kernel space filter,most time its not necessary
unless you suspect there is a bug
--sock-buf <number> buf size for socket,>=10 and <=10240,unit:kbyte,default:1024
--force-sock-buf bypass system limitation while setting sock-buf
--seq-mode <number> seq increase mode for faketcp:
0:static header,do not increase seq and ack_seq
1:increase seq for every packet,simply ack last seq
2:increase seq randomly, about every 3 packets,simply ack last seq
3:simulate an almost real seq/ack procedure(default)
4:similiar to 3,but do not consider TCP Option Window_Scale,
maybe useful when firewall doesnt support TCP Option
--lower-level <string> send packets at OSI level 2, format:'if_name#dest_mac_adress'
ie:'eth0#00:23:45:67:89:b9'.or try '--lower-level auto' to obtain
the parameter automatically,specify it manually if 'auto' failed
--gen-add generate iptables rule and add it permanently,then exit.overrides -g
--keep-rule monitor iptables and auto re-add if necessary.implys -a
--clear clear any iptables rules added by this program.overrides everything
-h,--help print this help message
-a and -gThis program sends packets via raw socket. In FakeTCP mode, Linux kernel TCP packet processing has to be blocked by a iptables rule on both sides, otherwise the kernel will automatically send RST for an unrecongized TCP packet and you will sustain from stability / peformance problems. You can use -a option to let the program automatically add / delete iptables rule on start / exit. You can also use the -g option to generate iptables rule and add it manually.
--cipher-mode and --auth-modeIt is suggested to use aes128cbc + hmac_sha1 to obtain maximum security. If you want to run the program on a router, you can try xor + simple, which can fool packet inspection by firewalls the most of time, but it cannot protect you from serious attacks. Mode none is only for debugging purpose. It is not recommended to set the cipher-mode or auth-mode to none.
--seq-modeThe FakeTCP mode does not behave 100% like a real tcp connection. ISPs may be able to distinguish the simulated tcp traffic from the real TCP traffic (though it’s costly). seq-mode can help you change the seq increase behavior slightly. If you experience connection problems, try to change the value.
--lower-level--lower-level allows you to send packet at OSI level 2(link level),so that you can bypass any local iptables rules. If you have a complicated iptables rules which conflicts with udp2raw tunnel and you cant(or too lazy to) edit the iptables rules,--lower-level can be very useful. Try --lower-level auto to auto detect the parameters,you can specify it manually if auto fails.
Manual format if_name#dest_mac_adress,ie:eth0#00:23:45:67:89:b9.
--keep-ruleMonitor iptables and auto re-add iptables rules(for blocking kernel tcp processing) if necessary.Especially useful when iptables rules may be cleared by other programs(for example,if you are using openwrt,everytime you changed and commited a setting,iptables rule may be cleared and re-constructed).
--conf-fileYou can also load options from a configuration file in order to keep secrets away from ps command.
For example, rewrite the options for the above server example (in Getting Started section) into configuration file:
server.conf
-s
# You can add comments like this
# Comments MUST occupy an entire line
# Or they will not work as expected
# Listen address
-l 0.0.0.0:4096
# Remote address
-r 127.0.0.1:7777
-a
-k passwd
--raw-mode faketcp
Pay attention to the -k parameter: In command line mode the quotes around the password will be removed by shell. In configuration files we do not remove quotes.
Then start the server with
./udp2raw_amd64 --conf-file server.conf --fifoUse a fifo(named pipe) for sending commands to the running program. For example --fifo fifo.file.
At client side,you can use echo reconnect >fifo.file to force client to reconnect.Currently no command has been implemented for server.
iperf3 TCP via OpenVPN + udp2raw (iperf3 UDP mode is not used because of a bug mentioned in this issue: https://github.com/esnet/iperf/issues/296 . Instead, we package the TCP traffic into UDP by OpenVPN to test the performance. Read Application for details.
iperf3 -c 10.222.2.1 -P40
iperf3 -c 10.222.2.1 -P40 -R
raw_mode: faketcp cipher_mode: xor auth_mode: simple
(reverse speed was simliar and not uploaded)
raw_mode: faketcp cipher_mode: aes128cbc auth_mode: md5
(reverse speed was simliar and not uploaded)
shadow-rs is a Windows kernel rootkit written in Rust, demonstrating advanced techniques for kernel manipulation…
Extract and execute a PE embedded within a PNG file using an LNK file. The…
Embark on the journey of becoming a certified Red Team professional with our definitive guide.…
This repository contains proof of concept exploits for CVE-2024-5836 and CVE-2024-6778, which are vulnerabilities within…
This took me like 4 days (+2 days for an update), but I got it…
MaLDAPtive is a framework for LDAP SearchFilter parsing, obfuscation, deobfuscation and detection. Its foundation is…