Using Hardware -Based Exploits : A Comprehensive Guide To Braktooth, Internalblue, And Automated Techniques

You need to buy the following hardware to be able to run the exploits: The installation is partially automated in the toolkit. Consult repository for other information.

Once you have needed hardware:

• you need to connect it to your machine
• Then run the following command

ls -la /dev/tty*

• If you see /dev/ttyUSB0 and /dev/ttyUSB1 then the development board is connected and you can start writing to it
• To continue Braktooth installation run the following commands

chmod +x /usr/share/Btoolkit/installation/braktooth_additional_install.sh
/usr/share/Btoolkit/installation/braktooth_additional_install.sh

Internalblue

Currently, we support only Nexus 5 phones, but you can add your hardware that supports internalblue as well LINK_TO_HOW_TO_ADD_HARDWARE.

The phone should already be set up according to Internalblue recommendations

On the first run, you might need to allow adb to debug your device and then install a BluetoothAssistant on your mobile device.

Useful commands:

• would list devices (if needed change your user to root)

adb devices

For more information click here.